Makita XT611PT 18-Volt 6-Tool 5.0Ah Drivers / Saws / Grinders Combo Kit. The XT611PT includes a brushless hammer driver-drill with a full 1,090 in. Of Max Torque, a brushless 3-speed impact driver with 1,550 in. Of Max Torque, a brushless 6-1/2″ circular saw with a full 5,000 RPM for faster cutting, a brushless recipro saw with two speed settings and a 1-1/4″ stroke length for faster cutting, and a brushless 4-1/2″/5″ Cut-Off/ Angle Grinder with 8,500 RPM and an electric brake for added productivity. The kit also includes a high-luminance single L. Flashlight with 200 lumens. It’s a one-stop solution for a wide range of applications. The kit includes two 18V LXT 5.0Ah batteries, and each reach a full charge in only 45 minutes on the efficient Rapid Optimum Charger – the fastest charge-time in the category – for less downtime and increased productivity. For added convenience, the batteries feature an integrated L. Battery charge level indicator. 18-Volt 1/2-Inch Cordless Hammer Driver-Drill – XPH07Z. BL Brushless Motor delivers 1,090 in. 0-31,500 BPM for fast hammer drilling in masonry materials. Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50-Percent longer run time per charge. The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life. The electronically-controlled BL Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application. All metal variable 2-speed transmission (0-550 and 0-2,100 RPM) for a wide range of drilling, fastening and hammer drilling applications. All metal gears and gear housing for maximum job site durability. All metal 1/2 self ratcheting chuck for improved bit gripping strength and durability. Compact and ergonomic design at only 8-1/8 long. Weighs only 5.9 lbs. With battery (battery not included) for reduced operator fatigue. Gauge indicates battery charge level. Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions. Rubberized soft grip provides increased operator comfort. Lights illuminate the work area. 18-Volt 1/4-Inch 3-Speed Cordless Impact Driver – XDT14Z. Quick-Shift Mode uses the brushless motor’s electronic controls to find the best balance of speed and torque for each application for more efficient fastening. Tightening Mode (T-mode) for faster tightening of self-drilling screws; helps prevent damage to the screw or workpiece. 3-speed power selection switch (0-1,100 / 0-2,100 / 0-3,600 RPM and 0-1,100 / 0-2,600 / 0-3,800 IPM) provides precise fastening control for a wide range of applications. BL Brushless Motor delivers 3,600 Max RPM and 1,550 in. Features Extreme Protection Technology (XPT) which is engineered to provide increased dust and water resistance in harsh job site conditions. Compact and ergonomic design at only 4-5/8 long. Weighs only 3.3 lbs. All metal gear housing for increased job site durability. Convenient one-touch 1/4 hex chuck for quick bit changes. Lights with an independent on/off switch illuminate the work area. Rubberized soft grip provides increased comfort on the job. 18-Volt 1-1/4-Inch Reciprocating Saw – XRJ05Z. Makita-built variable 2-speed brushless motor delivers 0-2,300 (Low) and 0-3,000 (High) strokes per minute and a 1-1/4 stroke length for faster cutting. “Tool-less” blade change system allows for faster blade installation and removal for increased productivity. Variable speed trigger for added convenience. Compact and ergonomic design at only 17-1/4 long. Weighs only 8.2 lbs. Rubberized soft grip handle provides increased comfort on the job. Reinforced fixed shoe for added durability. Large two-finger variable speed trigger for operator convenience. Electric brake for maximum productivity. Refined crank mechanism design minimizes blade deflection and reduces vibration. Equipped with Star Protection Computer Controls to protect against overloading, over-discharging and over-heating. 18-Volt 6-1/2-Inch Cordless Circular Saw – XSH03Z. BL Motor delivers 5,000 RPM for faster cutting and ripping. Automatic Speed Change technology adjusts cutting speed and torque during cut for optimum performance. Die-cast magnesium base, blade guard and safety cover provide a lightweight, durable design. Compact and ergonomic design at only 13-3/4 long. Weighs only 7.3 lbs. Large cutting capacity (2-1/4 at 90-Degrees) and bevel capacity (0-Degrees- 50-Degrees). Positive stop at 45-Degrees with fine adjustment. Built-in dust blower keeps the line of cut free of debris for more accurate cuts. Retractable tool hook secures the tool when not in use. 18-Volt 4-1/2 / 5-Inch Cut-Off/Angle Grinder – XAG04Z. Automatic Speed Change technology adjusts speed and torque during operation for optimum performance. Compact and ergonomic design at only 14-1/4 long. Weighs only 5.6 lbs. Slide switch with lock-on for operator convenience. Soft start suppresses start-up reaction for smooth start-ups and longer gear life. Spiral bevel gears for smoother rotations and a more efficient transfer of energy. Anti-restart protection engineered to prevent motor start up when battery is inserted with switch locked on. Efficient internal cooling is engineered for optimum performance. Wire mesh intake covers are engineered to prevent debris from entering motor. D Flashlight – DML802. Flashlight provides 160 lumens. 12 position pivoting flashlight head with positive stops from 60-Degrees – 110-Degrees. Aluminum flashlight head design for increased durability. Metal hang hook is convenient and job site durable. Multi-faceted reflector controls the direction and spread of the light. And provides a sharp, round spotlight. Compact and ergonomic design at only 10-3/4 long. Weighs only 2.1 lbs. With battery (battery and charger not included). An ideal addition to any toolbox or workshop. What’s in The Box. (2) 18-Volt 5.0Ah Lithium-Ion Battery. 18-Volt Lithium-Ion Dual Port Charger. 30 Day Satisfaction Guaranteed. Blows Per Minute (2-Speed). 0 – 8,250 / 0 – 31,500 Bpm. No Load Speed (2-Speed). 0 – 550 / 0 – 2,100 Rpm. No Load Speed (3-Speed). 0 – 1,100 / 0 – 2,100 / 0 – 3,600 Rpm. Impacts Per Minute (3-Speed). 0 – 1,100 / 0 – 2,600 / 0 – 3,600 Ipm. Cutting Capacity Wood w/ 12 in. Strokes Per Minute (2-Speed). 0 – 2,300 / 0 – 3,000 Spm. Cutting Capacity (at 45-Degrees). Cutting Capacity (at 90-Degrees). Variable Speed Control Dial. WHY FACTORY AUTHORIZED OUTLET? SECURE & HASSLE FREE SHOPPING. All our sales are backed by a 30-Day Satisfaction Guarantee. Products shown as available are normally stocked but inventory levels cannot be guaranteed. The item “Makita XT611PT 18-Volt 6-Tool 5.0Ah Drivers / Saws / Grinders Combo Kit” is in sale since Tuesday, February 6, 2018. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tools\Power Tool Sets”. The seller is “factory_authorized_outlet” and is located in Ontario, California. This item can be shipped to United States, Canada, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• Brand: MAKITA
• Voltage: Not Available
• Model: XT611PT
• MPN: XT611PT