Makita DLX6075M 18V 6 Piece Kit 3 x 4.0Ah Batteries Charger & 101 Accessory Set. Makita DHP453Z 18V LXT Combi Drill Makita DTD152Z 18V LXT Impact Driver Makita DHR202Z 18V Rotary Hammer SDS Plus Makita DGA452Z 18V LXT Angle Grinder Makita DTM50Z 18V LXT Multi-Tool Makita DML185 18V LXT Torch. Makita DHP453 Combi Drill. 22 minute charge time with the air cooled Makstar Optimum Charging System. Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time. Lithium-ion’s 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery. Conveniently located push button for forward and reverse. Two speed gear box. Makita DTD152 Impact Driver. Compact design with a short overall length of 138mm One-touch bit installation Fully Compatible with 18V 4.0Ah Battery with 36 minute charge time. LED job light with pre-glow and afterglow functions Enhanced dust and drip-proof performance New compact charger Compact and lightweight, 4-pole motor Ergonomically designed handle Lithium-ion battery, lighter weight, quicker charging and with more run time than an equal voltage Ni-Cad or Ni-MH battery. Makita DHR202 Rotary Hammer. LED job light with afterglow. One-touch sliding chuck for easy bit changes. Triple operation mode: Rotary only, hammer only and rotary hammer. Rotation mode: The chisel can rotate a full 360 degrees with 40 different locking positions. Makita DGA452 Angle Grinder. Electric brake Variable speed control trigger Equipped with Battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current Forward and reverse trigger LED job light Ergonomic soft grip. Thumb On/Off switch, positioned for ease of use when holding body of machine. Hex wrench holder on body. Variable speed control dial. Accessories can be installed at 30º increments, across 360º Uses OIS interface. Rubberised soft grip of ergonomic design 4 position pivoting head Falling impact strength of 1m 18v torch for use with lithium-ion batteries. 1 x DC18RD Twin Battery Charger 3 x 4.0Ah BL1840 Li-Ion Batteries 1 x LXT600 6pc Tool Bag 831279-0 1 x P-67832 101 Piece Drilling/Driving Bit Accessory Set. 6 x Wood drill bits 6 x Masonry drill bits 6 x HSS drill bits 3 x Flat bits 30 x 25mm Screwdriver bits 20 x 50mm Screwdriver bits 13 x Nut runners 4 x Holesaws 1 x Holesaw arbor 1 x Magnetic bit holder 1 x Centre punch 4 x Drill depth stops 2 x Screwfinders 1 x Hex key 1 x Countersink 1 x Screwdriver handle 1 x Spirit level. Battery Type – Lithium-ion Voltage – 18v Max. In masonry – 13 mm Max. In steel – 13mm Max. In wood – 36mm Blows per minute – 19500 – 6000bpm Noise sound pressure – 78dB(A) Noise sound power – 3dB(A) No Load Speed – 1300 – 400rpm Max Torque – 42Nm Torque Settings – 16 + drill Vibration: Drilling – 2.5 m/sec² Vibration K factor – 1.5 m/sec² Vibration: Hammer Drilling – 7.5 m/sec². Battery Type – Lithium-ion Voltage – 18v Electric Brake Variable Speed Control Impacts – 0-3200 ipm Drive shank Hex – 6.35mm (1/4)Reverse switch Standard Bolt – M5-M14 Joblight No Load Speed – 0-2300rpm Max Torque – 160Nm Vibration: Fastening Bolt – 15.5 m/sec² Vibration K factor – 2 m/sec². Battery Type – Lithium-ion Charging Time – 22min Voltage – 18v Max in concrete – 20mm Max. In wood – 26mm Impact energy – 2.0J Blows per minute – 0-4000bpm Noise sound pressure – 87dB(A) Noise sound power – 98dB(A) Noise K factor – 3dB(A) No Load Speed – 0-1100rpm Vibration: Drilling – 3 m/sec² Vibration K factor – 1.5 m/sec² Vibration: Hammer Drilling – 14.5 m/sec² Vibration: Chiselling – 11 m/sec². Grinding Wheel: 4-1/2″ / 115mm Cut-Off Wheel: 4-1/2″ Wire Cup Brush: 3-1/2″ / 115mm Sanding Disc: 4-1/2″ / 115mm No Load RPM: 10,000 Watt Hours: 54.0 Spindle Thread: 5/8″ – 11 UNC Overall Length: 12-1/2″. Battery Type – Lithium-ion Charging Time – 22 min Voltage – 18v Oscillation Angle – 3.2 º Oscillations per Minute – 6000 – 20000 Vibration K factor – 1.5 m/sec² Vibration: Cutting Metal – 5 m/sec² Vibration: Cutting Wood – 9.5 m/sec² Vibration: Chiselling – 7.5 m/sec² Vibration: Sanding – 2.5 m/sec². DML185 Barcode : 0088381675628 Weight: 0.36kg Voltage: 18v. Additional charges will be imposed if, weight is more than 1kg. Postcodes Details are Given Below. HS 1-9, I 1-56, KA27-28, KW1-17, PA20-49, PA62-77, PA60-61, PA78, PH17-26, PH-30-44, PH49-50, ZE1-3, BT1-94, IM1-9, IM99, TR21-25, Isle Of Wight. If, you receive any Parcel from us that contains damaged goods, this should be notified to customer services who will arrange for collection and replacement, within the 24-48 hours period. The item “Makita DLX6075M 18V 6 Piece Kit 3 x 4.0Ah Batteries Charger & 101 Accessory Set” is in sale since Friday, January 3, 2020. This item is in the category “Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Power Tool Sets”. The seller is “tools4trade” and is located in Milton Keynes. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, French guiana, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Costa rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Qatar, Trinidad and tobago, Uruguay, Viet nam.

• Model: DLX6075M
• Battery Included: Yes
• EAN: 0088381845403
• Power Source: Battery
• Type: Combo Kit
• Number of Tools: 6
• MPN: DLX6075M
• Number of Batteries: 3
• Battery Technology: Lithium-Ion (Li-Ion)
• Brand: Makita
• Voltage: 18 V